Options and Accessories
This document is also available in Excel Format.
MASTER OPTIONS LIST - Hardware Internally
Fitted
|
|||
PART# |
DESCRIPTION
|
PRODUCT FAMILY | COMMENT |
T01 |
Programmable Channel Spacing 25kHz / 12.5kHz.
|
MX800 | SUPPLIED BY DEFAULT |
T02 |
Programmable CTCSS full duplex encoder and decoder. Obsolete
|
MX800 | OBSOLETE USE T03B |
T03 | Programmable DCS / CTCSS full duplex encoder and
decoder. Obsolete |
MX800 | OBSOLETE USE T03B |
T03B |
Programmable DCS / CTCSS full duplex encoder and
decoder. Multiple CTCSS, Supports the standard 39 EIA Standard Code Frequencies.
|
MX800 | |
T04 | OBSOLETE USE T05 0R T29 | ||
T05 |
Balanced and Isolated VF I/O with E&M Lead (adds
RJ45 socket at rear). Use T29 for lower cost
|
MX800 | |
T06 |
Simplex Coaxial Changeover Relay.
|
MX800 | |
T07 |
Turn Around Mixer and self test.
|
MX800 | NOT AVAILABLE (TBA) |
T08 |
VF audio delay for noiseless mute function.
|
MX800 | |
T09 |
Additional RX high rejection 300Hz VF HPF for
CTCSS filtering.
|
MX800 | OBSOLETE |
T10 |
Low RX standby current drain option.
|
MX800 | |
T11 | |||
T12 |
Add external reference oscillator input facility
for TX only. BNC type connector. RX IN becomes N-Type.
|
MX800 | |
T13 |
Local speaker and mic socket. No mic supplied.
|
MX800 | |
T14 |
Local channel change on front panel (100 channels).
|
MX800 | |
T15 |
Rx input fitted with N-type connector (Required
whith T12 or duplexer)
|
MX800 | |
T16 |
1PPM TX Freq stability –30 to +60C 12.5/25kHz
channels. - 12.5kHz channels Frequency band K to X (320-950MHz)
- 25.0kHz channels Frequency band R to X (805-950MHz)
|
MX800 | |
T17 | |||
T18 |
Extended low temperature (-30deg) factory Verify
test certification.
|
MX800 | REPLACED BY U69 &U68 |
T19 |
Line Interface Board. (encode/decode) Tone PTT
decoder with AGC on Tone, 2W-4W Conversion, RX Status Tone, RX
Mute Status Tone, Variable Tone Voting, Dual E+M.
|
MX800 | |
T20 | |||
T21 |
4 Way DIN Ant C/O socket at rear. Permits external
C/O relay
|
MX800 | |
T22 |
RX noise limiter.
|
OBSOLETE | |
T23 |
Special chassis variant similar to KX radio
|
MX800 | |
T24 |
Change internal cabling for Cell Extender system
|
MX800 | |
T25 |
Special chassis variant with DB37 for Nokia LIC
Interface
|
MX800 | |
T26 |
Line Interface Board. (encode only) 2W-4W Conversion,
RX Status Tone, RX Mute Status Tone, Variable Tone Voting, Dual
E+M.
|
MX800 | |
T27AA |
Extended Warranty Std plus 1 year
|
MX800 | REPLACED BY U85 |
T27BA |
Extended Warranty Std plus 2 years
|
MX800 | REPLACED BY U86 |
T28 |
RX IF Amplifier. (Used in LTR systems refer T99).
|
MX800 | |
T29 |
Balanced and Isolated VF I/O with E&M Lead (Same
as Opt T05 but RJ45 pinout to AS3080).
|
MX800 | |
T30 |
PPS12 power supply lead packed with MX800.
|
MX800 | REPLACED BY U06 |
T31 |
Network Expander card
|
MX800 | |
T32 |
Front Panel adjustable Line I/O levels and Front
panel RS232 port (in parallel with rear port). Only available
with T13.
|
MX800 | |
T33 |
Internal dial up PSTN modem
|
MX800 | |
T34 |
Ethernet to RS232 adapter on MX800 (Remote diagnostics)
|
MX800 | |
T35 |
Balanced and Isolated VF I/O with E&M Lead
(When used in conjunction with T34) |
MX800 | |
T36 |
TX Ref Oscillator Input and Modulator (POCSAG,
SIMULCAST)
|
MX800 | |
T37 |
T36 with Internal 1PPM reference oscillator
|
MX800 | |
T38 |
T36 with Internal Custom order reference oscillator
|
MX800 | |
T39 |
RX Splitter Option
|
MXACU | |
T40 |
Internal Ethernet Module
|
MXACU | |
T41 |
Internal Modem
|
MXACU | |
T42 | Antenna Changeover Relay
|
MXACU | |
T43 |
Internal Ethernet interface for remote diagnostics
|
MXSSU | NOT AVAILABLE (TBA) |
T44 |
Simplex mode and TX/RX Relay
|
MXSSU | |
T45 |
System Interface expansion
|
MX921 | |
T46 |
Low Loss Solar Regulator and intelligent Battery
Manager
|
MX921 | |
T47 |
Simplex Coaxial Changeover Relay Assembly
|
MX921 | |
T48 |
Rx input fitted with N-type connector
|
MX921 | |
T49 |
Internal Microcom Modem interface
|
MX800 | |
T50 |
Paging Input option
|
MX800 | |
T51 |
Simplex Coaxial Changeover Relay Assembly
|
MX920 | |
T52 |
Internal battery bracket kit (Battery not supplied)
|
MX920 | |
T53 |
Duplexer bracket kit
|
MX920 | |
T54 |
Internal Power supply for MX920 PPS12 230VAC to
13.8VDC, 12A / 60C & Battery charger.
|
MX920 | OBSOLETE |
T55 |
Internal Power supply for MX920 PPS12 110VAC to
13.8VDC, 12A / 60C.
|
MX920 | OBSOLETE |
T56 |
Internal Power supply for MX920 MXPS15 85-264VAC
to 13.8VDC & Battery charger.
|
MX920 | |
T57 |
Internal Power supply for MX920 MXPS15b 85-264VAC
to 13.8VDC basic.
|
MX920 | |
T58 | |||
T59 |
|
||
T60 |
Internal notch Duplexer for MX920 (Factory fitted)
144-160MHz, 5MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T61 |
Internal notch Duplexer for MX920 (Factory fitted)
160-175MHz, 5MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T62* |
Internal notch Duplexer for MX920 (Factory fitted)
144-160MHz, 10MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T63* |
Internal notch Duplexer for MX920 (Factory fitted)
166-175MHz, 10MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T64* |
Internal notch Duplexer for MX920 (Factory fitted)
340-360MHz, 5MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T65* |
Internal notch Duplexer for MX920 (Factory fitted)
375-410MHz, 10MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T66* |
Internal notch Duplexer for MX920 (Factory fitted)
375-410MHz, 5MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T67* |
Internal notch Duplexer for MX920 (Factory fitted)
400-440MHz, 5MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T68* |
Internal notch Duplexer for MX920 (Factory fitted)
440-475MHz, 5MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T69 |
Internal notch Duplexer for MX920 (Factory fitted)
400-440MHz, 10MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T70 |
Internal notch Duplexer for MX920 (Factory fitted)
440-475MHz, 10MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T71 |
Internal notch Duplexer for MX920 (Factory fitted)
470-512MHz, 10MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T72 |
Internal notch Duplexer for MX920 (Factory fitted)
470-512MHz, 5MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T73 |
Internal notch Duplexer for MX920 (Factory fitted)
500-535MHz, 5MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T74 |
Internal notch Duplexer for MX920 (Factory fitted)
500-535MHz, 10MHz (TX/RX Split)
|
MX920 | OBSOLETE |
T80 |
APCO P25 DIGITAL OPTION BOARD FOR MX800 REPEATER
|
MX800 | |
T81 |
APCO P25 DIGITAL OPTION BOARD FOR MX800 REPEATER
/ BASE STATION
|
MX800 | |
ALIGNMENT AND CONFIGURATION OPTIONS
|
|||
PART# |
DESCRIPTION
|
PRODUCT FAMILY | COMMENT |
T95 |
Packing request - DC Power Lead (U06) to be packed with MX800 and not with power supply unit
|
||
T96 |
Alternative alignment Set line level of –32dbm
to produce Nominal deviation VSWR alarm set to 2:1 Line O/P level
-10dBm
|
MX800 | |
T97 |
MX800 alignment and configuration for CSI LTR
controller (Includes T28 Option)
|
MX800 | |
T98 |
Alternative TX modulation alignment compression
point changed from 60% to peak.
|
MX800 | |
T99 |
Alignment and configuration for Trident Controller
(Includes T28 Option)
|
MX800 |
MASTER ACCESSORIES LIST - For all Spectra
Engineering products
|
|||
PART# |
DESCRIPTION
|
PRODUCT FAMILY | COMMENT |
U01 |
MXTOOLS MX800 Series Programming Software
|
MX800 | |
U02 |
MX800 Series Technical Manual Spectra Engineering
logo
|
MX800 | |
U03 |
MX800 Additional spare Power plug.
|
MX800/MX921 | |
U04 |
PPS15-3 240VAC to 13.8VDC, 15A / 70C 3RU power
supply and charger.
|
PSUs | |
U05 |
PPS20-3 240VAC to 13.8VDC, 20A / 70C 3RU power
supply and charger.
|
PSUs | |
U06 |
Power supply lead adapter for PPS12 & MXPS15
|
MX800/MX921 | |
U07 |
Spare connector kit (PPS12 & MXPS15)
|
PSUs | |
U08 |
Spare connector kit (MX920)
|
MX920 | |
U09 |
PPS15-3 110VAC to 13.8VDC, 15A / 70C 3RU power
supply and charger.
|
PSUs | |
U10 |
PPS20-3 110VAC to 13.8VDC, 20A / 70C.
|
PSUs | OBSOLETE REPLACED BY 2X U15 or 2X U14 Modules. |
U11 |
PPS12 110VAC to 13.8VDC, 12A / 60C power supply.
|
PSUs | REPLACED BY U15 |
U12 |
PPS12 110VAC to 13.8VDC, 12A / 60C power supply
Fitted on 19” panel for rack mounting application.
|
PSUs | REPLACED BY U33 |
U13 |
Technical manual MXD1500 (Motorola)
|
MX800 | |
U14 |
MXPS15 Universal voltage power supply 85-264VAC
with battery backup & filtering
|
PSUs | |
U15 |
MXPS15b Universal voltage power supply 85-264VAC
|
PSUs | |
U16 |
Desk top Microphone
|
MX800/MX920/MX921 | |
U17 |
1525RA 24VDC to 13.8VDC 15A DC to DC converter.
|
PSUs | OBSOLETE |
U18 | |||
U19 | |||
U20 |
Fist Microphone ( Motorola GM300 Type P/N HMN3413A)
|
MX800/MX920/MX921 | |
U21 |
Dual PPS12 240VAC to 13.8VDC, 12A / 60C power
supply and charger, 2RU 19” rack mounting.
|
PSUs | REPLACED BY U39 |
U22 |
Dual PPS12 110VAC to 13.8VDC, 12A / 60C power
supply, 2RU 19” rack mounting.
|
PSUs | REPLACED BY U39 |
U23 |
Duplexer shelf for 2RU panel mounting.
|
DUPLEXER | |
U24 |
Duplexer shelf including 2RU mounting panel.
|
DUPLEXER | |
U25 |
PPS12 220VAC to 13.8VDC, 12A / 60C power supply
and charger.
|
PSUs | REPLACED BY U14 |
U26 |
PPS12 220VAC to 13.8VDC, 12A / 60C power supply
Fitted on 19” panel for rack mounting application.
|
PSUs | REPLACED BY U38 |
U27 |
MX920 Technical Manual.(Soft copy)
|
MX920 | |
U28 |
3RU Rackmount Tray
|
MX920 | |
U29 | |||
U30 | |||
U31 |
Wall Mountable Kit for Vertical model
|
MX920 | |
U32 |
MXPS15 Universal voltage power supply - 85VAC
to 264VAC- 9Amps 100%duty, - 15Amps peak - With Battery backup
system & filtering - 19” 2RU panel for rack mounting applications
|
PSUs | |
U33 |
DUAL MXPS15 Universal voltage power supply - 85VAC
to 264VAC- 9Amps 100%duty, - 15Amps peak - With Battery backup
system & filtering - 19” 2RU panel for rack mounting applications
|
PSUs | |
U34 | |||
U35 | |||
U36 | |||
U37 |
Programming cable
|
MX920/MX921/MXSSU | |
U38 |
MXPS15B Universal voltage power supply - 85VAC
to 264VAC- 9Amps 100%duty, - 15Amps peak - 19” 2RU panel for rack
mounting applications
|
PSUs | |
U39 |
DUAL MXPS15B Universal voltage power supply -
85VAC to 264VAC- 9Amps 100%duty, - 15Amps peak - 19” 2RU panel
for rack mounting applications
|
PSUs | |
U40 |
Series notch duplexer, 144-160MHz, 5MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U41 |
Series notch duplexer, 160-175MHz, 5MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U42* |
Series notch duplexer, 144-160MHz, 10MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U43* |
Series notch duplexer, 166-175MHz, 10MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U44* |
Series notch duplexer, 340-360MHz, 5MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U45* |
Series notch duplexer, 375-410MHz, 10MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U46* |
Series notch duplexer, 375-410MHz, 5MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U47* |
Series notch duplexer, 400-440MHz, 5MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U48* |
Series notch duplexer, 440-475MHz, 5MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U49 |
Series notch duplexer, 400-440MHz, 10MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U50 |
Series notch duplexer, 440-475MHz, 10MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U51 |
Series notch duplexer, 470-512MHz, 10MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U52 |
Series notch duplexer, 470-512MHz, 5MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U53 |
Series notch duplexer, 500-535MHz, 5MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U54 |
Series notch duplexer, 500-535MHz, 10MHz (TX/RX
Split)
|
DUPLEXER | OBSOLETE |
U55 | |||
U56 | |||
U57 | |||
U58 |
Duplexer tunning to customer's frequencies
|
DUPLEXER | |
U59 |
Duplexer cable set (2x N-Type to N-type) suits
MX920
|
DUPLEXER | |
U60 |
IEC Lead (Australian Plug)
|
PSUs | |
U61 |
IEC Lead (U.S.A. Plug)
|
PSUs | |
U62 | |||
U63 | |||
U64 |
Extended Warranty Std plus 1 year (For MX92x base
station & including factory fitted options)
|
MX920/MX921 | |
U65 |
Extended Warranty Std plus 2 year (For MX92x base
station & including factory fitted options)
|
MX920/MX921 | |
U66 |
Extended Warranty Std plus 1 year (For MX800 base
station & including factory fitted options)
|
MX800 | |
U67 |
Extended Warranty Std plus 2 year (For MX800 base
station & including factory fitted options)
|
MX800 | |
U68 |
Extended low temperature verification to -30 oC
for MX921 (Factory test certification provided)
|
MX921 | |
U69 |
Extended low temperature verification to -30 oC
for MX800 (Factory test certification provided)
|
MX800 | |
U70 |
RJ45 to terminal strip adaptor including bracket
|
MX800 | |
U71 |
Channel/Network ID dongle
|
MX800 | |
U72 |
Network expander dongle (Without Port Replicator)
|
MX800 | |
U73 |
Network expander dongle (With Port Replicator)
|
MX800 | |
U74 |
MX800 Series Technical Manual LC Variant Spectra
logo
|
MX800 | |
U75 |
MX800 Series Technical Manual Customer specific
|
MX800 | |
U76 |
MX921 Technical Manual.(Soft copy)
|
MX921 | |
U77 |
MX800 Series Technical Manual Customer specific
|
MX800 | |
U78 |
MX800 Series Technical Manual Customer specific
|
MX800 | |
U79 | |||
U80 | |||
U81 | |||
U82 | |||
U83 | |||
U84 | |||
U85 | |||
U86 | |||
U87 | |||
U88 | |||
U89 | |||
U90 | |||
U91 | |||
U92 | |||
U93 | |||
U94 | |||
U95 | |||
U96 | |||
U97 | |||
U98 | |||
U99 |